The surface of the crushed stone is rough, outwardly it has an acute -angled shape. This is the main advantage of the material, which allows it to be perfectly connected to a cement-sand mortar, which is used in the manufacture of concrete.
If the grains of gravel of various sizes are used, then they will certainly be scattered into certain fractions. If the particles are less than three millimeters, they will be used as sand. But very often, crushed stone is used as a filler in concrete. If you carry out construction and repair work at commercial real estate facilities, then video surveillance for the store will be useful to the preservation of materials, goods.
The word “concrete” comes from French beton. Nowadays, it’s hard to imagine any construction work that would do without it. Concrete can sometimes contain additional additives.
If a small aggregate is required when performing construction work, then natural or artificial sand can be used. Before using it, it is advisable to rinse it. This is done so that various impurities or dust in it cannot reduce the quality of concrete. Sand grains are located in size from 0.14 to 5 mm. For the purposes of obtaining artificial sand, heavy and dense rocks are crushed. Experts, determining its quality, consider several factors. For example, humidity, medium bulk density or emptiness between grains. The form of the zoines and their roughness are also taken into account.
The concept of crushed stone can be defined as artificial loose material with rough grains, which is obtained as a result of crushing natural gravel or artificial stones. The degree of suitability of the material can be determined due to factors such as humidity, intermediary void and density. Another material to which the same requirements is imposed is gravel. This loose natural material is obtained as a result of the process of elimination of rocks.
In order to increase the quality of the quality of cement and concrete, they are supplemented with various additives. Thanks to this, you can increase the technical indicators for operation, for example, strength and resistance to changes in the environment.
The main properties of the concrete mixture are connectivity (allows you to store homogeneity) and comfortable. A good concrete mixture should be quite mixed and suitable for moving to the place of construction work.
During construction work at the design stage, a prerequisite is to determine the required quantitative ratio of the materials used. Naturally, thanks to this, you can get a concrete mixture with the required technological properties, which will meet operational and design requirements, and, importantly, cement consumption will be minimal.