To make a door for a bath with your own hands, you will need to understand some nuances regarding bath doors. Doors should be made with the following conditions:
The door should not heat up;
They should not change their shape from the difference in temperature;
Humidity should not have any effect on them.
So, the door should be made of wood, according to the methods that were used earlier in Russia. A prerequisite for the manufacture should be a high temperature and moisture resistance of the door.
Photos of the door for the bathhouse
How to make doors for a bath for a bath with your own hands.
First of all, you need to know that making the door is best from alder or linden trees, the oak tree is also well suited. If you use coniferous breeds of trees, such as pine or spruce, then the surface will need to be cleaned of the resin. But the most optimal option for the door in the bath is a linden tree. As a result, the size of the resulting door of the bath should be 16 m. x 0.65 m.
Manufacturing of the door to the bathhouse
You need to take a few 50 mm. boards. The boards should be desirable (it is better to purchase ready -made in the store).The boards must be put in 1 row so that not a single board sticks out. Shpunts boards are best smashed with glue. After it dries, you need to choose a place for grooves. Grooves will need to be made in the form of a cone with truncation. The passage of the grooves will be about a quarter or half of the board. In the diameter, the groove should be 50 mm, on top – 35 mm. The grooves should be cut according to the marks using the saws: taking the angle of 45 degrees, two recesses of about half the thickness of the board are cut off. In order for the angle to be the same, you need to use a bar with a cut of 45 degrees. Excess wood in the sawdust is removed by a chisel. In order to make the gaps, a beam is taken no thinner than 50 mm. Next, you should assemble the door leaf and remove them. Then you need to knock out the wishes in the grooves, and cut their ends in the shape of a cone. If the boards and downs are put on glue, then the door lifespan will increase significantly. Next, you need to install the door in the barbecue log house.
Installation of the door in a bath log house
Когда составляется проект дома ручной рубки,то желательно учитывать расположение дверных и оконных проемов. At the edges of the doorway, you need to make grooves and drive wooden bars into them. Then the door box is fixed on them. On top you need to make a gap, t.to. In the future, the bath log cabin will be seated and dry out. The door to the bath should be done with access to the south. You can also use forged loops as an element of the door decor from the outside. A good decoration of the door will be a porch with a beautiful thread. After all, not only the door itself is important, but also the way it looks is much more pleasant to go into the bathhouse, through a beautiful, decorated door.
If you make a bath door as described above, then it will last you for many years.